LDR2 Series

Any angle can be created with CCS’s unique flexible circuit boards.
The required irradiance is ensured by radiating direct light towards the center of the workpiece.

FEATURES

  • Standard Ring Lights

Uses a flexible circuit board to achieve the functions needed for a Ring Light. It can illuminate workpieces at an angle and can illuminate the whole workpiece. This alleviates the influence of slight position or inclination deviations in the workpiece and enables stable imaging.

Flexible circuit board

  • Succeeds in greatly reducing LED’s heat

Heat dissipation material is used between the board and the aluminum housing, absorbing heat produced by the LEDs. This succeeds in greatly reducing the creation of heat, which causes the LEDs to deteriorate.

Cross-section image of the LDR2-120

  • Example configuration

Bend the flexible circuit board to any shape necessary and mount LEDs with high density. Illuminates so that direct light is concentrated in the center.

LDR2-90


CHARACTERISTICS / DATA

  • DATA: RELATIVE IRRADIANCE GRAPH AND UNIFORMITY (REPRESENTATIVE EXAMPLE)

LDR2-50RD2

*The data included is for reference only. Actual values may vary.

  • LED PROPERTIES

Spectral distribution

Directional characteristics

Be sure to read the “Instruction Guide” included with the product before use and follow the safety precautions upon use.
The data included is for reference only. Actual values may vary.

CUSTOM ORDER EXAMPLE

IMAGING EXAMPLE

  • ELECTRODE IMAGING OF ELECTRONIC PARTS
DescriptionVisual inspection
WorkpieceElectronic parts
Conventional lightingLED Bar Light
New lightingLDR2-32RD2
ResultImproved uniformity
  • IMAGING TEXT ON AN INTAKE VALVE
DescriptionCharacter recognition
WorkpieceIntake valve (automobile part)
Conventional lightingLED Ring Light
New lightingLDR2-50RD2
ResultEmphasized characters