AT-140GE – Advance Ultravision

[SCHEDULED FOR DISCONTINUATION]

This product is in the process of being discontinued and is not recommended for new projects. Last orders must be placed by 30 September 2019. Comparable replacement products are available. Click the “Contact a JAI engineer” button below to discuss your requirements and explore alternative product options.

The Apex AT-140-GE is a 3-CCD prism-based industrial RGB area scan camera delivering 3 x 1.4 megapixels at 20 frames/second. It provides better color fidelity and spatial resolution than traditional Bayer color cameras and is designed for color-critical imaging and inspection tasks in machine vision, life science and microscopy applications.

SUMMARY

ACCURATE AND CRISP COLORS IMAGES

Using a special prism-based imaging technique, the incoming light is separated into red, green and blue wavelengths, captured by three precisely-aligned CCD sensors. The result is better color accuracy and spatial precision than traditional color cameras using the Bayer mosaic technique.

ANALOG GAIN AND EXPOSURE SETTING FOR EACH INDIVIDUAL R-G-B CHANNEL

In all Apex cameras the analog gain and the exposure time can be set independently for the red, green and blue channel allowing for better signal/noise conditions. This maximizes the dynamic range for each color channel resulting in improved image quality.

EQUIPPED WITH GIGE VISION INTERFACE

The AT-140GE is built around three Sony ICX267AL CCD sensors with global shutter. Combined with a GigE vision interface, this machine vision camera can output 3 x 1.4 megapixels at 20 frames/second in full resolution.

FEATURES

3-CCD RGB color camera.
3 x ICX267AL sensors.
GigE Vision interface.
24-bit or 30-bit data output.
Individually controllable exposure for each RGB channel.
One-push white balance, programmable color matrix, and other advanced features.
Robust and compact design (shock 50G/vibration 3G).
Partial scan and binning modes available for higher frame rates.
A wide range of pre-set and programmable shutter and exposure modes.
Built-in pre-sets are provided for calibrating the camera with sRGB or Adobe RGB color spaces.

SPECIFICATION

Product line	Apex series
Model	AT-140-GE
Type	Area scan
Color / Mono	Color
Light spectrum	Visible
Resolution	1.4 MP
Resolution (WxH)	1392 x 1040 px
Frame rate / line rate	20 fps
ROI	Yes
Interface	GigE Vision
Sensors	3XCCD RGB
Sensor name	ICX 267AL
Optical format	1/2 inch
Cell size (WxH)	4.65 x 4.65 µm
Shutter type	Global shutter
Sensor diagonal	8.1 mm
Active sensor dimensions (WxH)	6.5 x 4.8 mm
Camera dimensions (HxWxL)	55 x 55 x 98.3 mm
Weight	340 g
Video output	8/10-bit
Lens mount	C-Mount
Power consumption	7.92 watt
Operating temperature (ambient)	-5°C to +45°C

ACCESSORIES

PD-12 POWER SUPPLY	There are four versions are available: 1. *PD-12UUP* – U.S. plug with 12-pin Hirose connector to camera 2. *PD-12UEP* – European plug with 12-pin Hirose connector camera 3. *PD-12UU* – U.S. plug, flying leads (no 12-pin connector) 4. *PD-12UE* – European plug, flying leads (no 12-pin connector) DOWNLOAD DATASHEET
MP-41 TRIPOD MOUNTING PLATE	Only use the supplied M3 screws having the proper length. Using longer screws can damage internal circuit boards.
PC-12P HIROSE 12-PIN CONNECTOR	The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
12P-02S POWER CABLE	This cables features flying leads on one end and a Hirose 12-pin connector on the other wired to match the pinout of JAI cameras with 12-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras. The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems. DOWNLOAD DATASHEET